尺寸自由 武器配件收纳

Fully screwless print-in-place box/ various sizes, with logo and label placement option / This collection contains the following models:90x90x30 inner cavity box ( 100x100x40 outer dimension ) in three variation:Plain topTop with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )90x90x50 inner cavity box ( 100x100x60 outer dimension ) in three variation:Plain topTop with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )For every size there is an insert that fits the bottom half of the box. Combine it with your parts ( as negative parts ) to create custom holders.For other dimensions, please check out my other collection:https://makerworld.com/en/models/555631#profileId-474421 If you are printing the models on non-Bambulab printers please bare in mind the following:Use support of the lower part of the lock, and if you want to print one of the boxes with logos, use support on the logo seatings as wellPrevent using any support on the hinges and on the hinge of the lock.Increase infill at the hinge section and its close proximity.Due to some exporting errors, the step files contain a small fragment body at the lower part of the hinge that needs to be manually deleted before printing. ( sorry about that:) )In case you have any feedback, feel free to share. Im curious to see what you make of the model. If you print one please post a photo of it as an inspiration for others. Boost MeIf you liked my model, and want to see more of my work, LIKE & FOLLOW my profile, and BOOST this model if you can. Thanks in advance:) CHINESE VERSION (PROVIDED BY TRANSLATE:D) 完全无螺丝现场打印盒/ 各种尺寸，带徽标和标签放置选项 /此系列包含以下型号：90x90x30 内腔盒（外部尺寸 100x100x40）有三种变体：平顶顶部带 LOGO 座（可容纳以下尺寸的插件：20x20x1,6-1,8mm，半径为 3mm）顶部带较小 LOGO（可容纳以下尺寸的插件：15x15x1,6-1,8mm，半径为 3mm）和标签座（可容纳以下尺寸的插件：40x10x1,6-1,8mm，半径为 3mm）90x90x50 内腔盒（外部尺寸 100x100x60）有三种变体：平顶顶部带 LOGO 座（可容纳以下尺寸的插件尺寸：20x20x1,6-1,8mm，半径为 3mm）顶部带有较小的 LOGO（可容纳以下尺寸的插件：15x15x1,6-1,8mm，半径为 3mm），以及标签座（可容纳以下尺寸的插件：40x10x1,6-1,8mm，半径为 3mm）每种尺寸都有一个适合盒子下半部分的插件。将其与您的零件（作为负片）组合以创建自定义支架。如需其他尺寸，请查看我的其他系列：https://makerworld.com/en/models/555631#profileId-474421如果您在非 Bambulab 打印机上打印模型，请牢记以下几点：使用锁下部的支撑，如果您想打印带有徽标的盒子之一，请在徽标座位上使用支撑避免在铰链和锁的铰链上使用任何支撑。增加铰链部分及其近处的填充。由于一些导出错误，步骤文件在铰链下部包含一个小片段主体，需要在打印前手动删除。（对此感到抱歉：））如果您有任何反馈，请随时分享。我很好奇你对模型的看法。如果你打印一个，请发布它的照片作为对其他人的启发。